All of the current Heka Incubators, Hatchers and Brooders require the use of a step up transformer to ensure they receive to correct voltage. Most commercially available transformers will step up North American 110 or 120 Volt current up to the 230 volts required to run your Heka.
What is the correct size transformer for your incubator or hatcher? The typical rule of thumb is to get a transformer with at least twice the watts required. Many transformers will have 2 outlets available. The chart below outlines the power requirements for the Heka Incubators and Hatchers:
We have used the following transformer as found on Amazon:
